Super-translucent zirconia
SOLID
The high-strength family for demanding restorations, including implant-supported indications.
Technical data
Complete
specifications.
Material properties, composition and product positioning published for the SOLID family.
- Product type
- Super-translucent zirconia
- Yttria composition
- 3 mol%
- Fracture toughness
- 5.5
- Sintering temperature
- 1500°C
- Density
- ≥ 6.0 g/cm³
- Chemical solubility
- ≤ 100 µg/cm²
- Radioactivity
- < 0.1 Bq/g
- ZrO₂ + HfO₂ + Y₂O₃
- > 99 wt%
- Other oxides
- ≤ 1.0 wt%
Formats & shades
Every available
configuration.
Open-system Ø98 mm discs with the thickness and shade choices published for this family.
Open-system disc
Thicknesses
Shade range
Sintering workflow
Published programs
and temperature curves.
Review each stage and its corresponding Matovix chart. Use the batch instructions and a calibrated furnace for production.
- 01
Room temperature → 500°C at 4°C/min
- 02
500°C → 1150°C at 8°C/min; hold 30 minutes
- 03
1150°C → 1300°C at 2°C/min
- 04
1300°C → 1500°C at 4°C/min; hold 120 minutes
- 05
Cool to 800°C at 8°C/min
- 06
Published total cycle: approximately 564 minutes
Indications
Where SOLID
fits the workflow.
High-strength crowns, multi-unit bridges and implant-supported restorations. SOLID-White and SOLID-Mono programs are published by Matovix.
Values, shade availability and charts are based on Matovix's current published information. Final product, batch protocol and indication should be confirmed before use.
Let’s build your next step
Your workflow.
Our focus.
Tell us what you want to create.
We’ll help you find the right tools, materials and equipment.